防靜電工作服

防靜電服,防靜電工作服采用專用滌綸長絲經向或經向緯向嵌織，經特殊工藝制造而成，具有優異、持久的導電性能，目前廣泛用于醫藥、微電子、精密儀表、精密機械、食品工業、生命工程、精細化工等行業，是從事人員衣物防靜電的必要措施。 

防靜電服,防靜電工作服的功能隨著穿用時間的增長而下降。在正常的室內穿用情況下,導致防靜電服功能下降的原因主要有以下三個方面: 

一、是穿著過程中受到各種機械力的作用;

二、是洗滌;

三、是纖維的老化。

其中前兩個方面的影響比較明顯，并會影響到穿著者的安全和所生產產品的質量。穿著這類工衣從事作業時，人體在不斷地活動,防靜電服,防靜電工作服也隨著壓力傳感器測試在肘部關節活動狀態達到極限時(小臂和上臂夾角最小時)，服裝肘部的受壓力情況。在服裝肘部受壓測試的基礎上，采用有限元分析方法確定和模擬防靜電服的張力分布情況，從而得出服裝肘部的極限受力情況。分析模型是基于極限活動狀態人體肘關節的表面狀態來決定的。 

因此，在使用防靜電服,防靜電工作服過程中，除了需要正確使用和定期養護之外，也要定期進行更換。穿用一段時間后，應進行檢驗，若靜電性能不符合標準要求，則不能再使用，要保證有效的工作哦。

英文版

Anti-static clothing, anti-static overalls using special polyester filament warp or warp weft inlaid fabric, manufactured by special technology, has excellent conductive properties, durable, widely used in medicine, microelectronics, precision instruments, precision machinery, food industry, life engineering, fine chemical industry, it is necessary to measure personnel engaged in anti-static clothing.

Antistatic clothing, anti-static overalls function as the wear time decreased. In normal indoor wear, the main reasons for the decline of this kind of clothes and clothes are the following three aspects:

First, the wearing process is affected by a variety of mechanical forces;

Two, washing;

Three, fiber aging.

Among them, the first two aspects of the impact is obvious, and will affect the safety of the wearer and the quality of the products produced. In this kind of clothing workers engaged in operations, human activities constantly, anti-static clothing, anti-static overalls with pressure sensor test reached a limit in active elbow (arm and upper arm, elbow angle most hours) clothing by pressure. On the basis of the elbow compression test, the finite element analysis method is used to determine and simulate the tension distribution of the antistatic clothing, and the ultimate force of the elbow is obtained. The analysis model is based on the extreme activity state of the human elbow joint surface condition.

Therefore, in the use of anti-static clothing, anti-static overalls, in addition to the need for proper use and regular maintenance, but also regular replacement. Wear after a period of time, should be tested, if the electrostatic performance does not meet the standard requirements, then can not be used, to ensure effective work oh.